| Click on category names to expand/collapse list |
Incubators
General
| Beckman Biomek SL Incubator, Model 2000 | |
| For use with the Biomek 2000 |
| Beckman Incubator/Oven, Dual Chamber, Model 6555 approx .7 cu ft each | |
| Bellco Incubator, Catalog 7727-35022 | |
| Double Door, Water Jacketed |
| CMS Incubator, Equatherm, Model 213-348 | |
| Darwin Chambers Environmental Stability Chamber Incubator, Model PH024-RC-DA |
|
| Specifications: -Temperature Range: 20-60 degrees celsius -Control of Temperature at Sensor: + or - 0.2 degrees celsius -Temperature Sensor Accuracy: + or - 0.2 degrees celsius -Humidity Range: Ambient to 90 percent -Humidity Control at Sensor: + or - 0.2 percent -Humidity Sensor Accuracy: + or - 0.8 percent RH @ 23 degrees celsius -Interior cubic feet: 24 Temperature / Relative Humidity control and uniformity specifications assume standard operation in a controlled ambient condition of 72 degrees fahrenheit and RH at or below 50 percent. Chamber features microprocessor controller with PID, Auto tuning, programmable (hi/lo) alarms, ability to ramp/soak, process variable and set-point variable offset, dual display of actual and set-point temperature and humidity. 300 series brushed stainless steel exterior front, brushed aluminum finish exterior sides, white polyester-coated aluminum interior and stainless steel floor with covered corners. Included: Ultrasonic Cool Mist Humidifier Future Design Chart recorder with Dual pen and digital display, Model DR5000. Four adjustable shelves 5 Gallon Gravity feed water storage tank The current chart is a Honeywell, PN 240016610601, -30 to 70 degrees C and 0-100 units for humidity. Has compressed air connection with solenoid valve and flow meter for dry air hookup dehumidification for more accurate control at or below ambient humidity levels. Fully tested at 20 and 40 degrees celsius with ambient temperature of 72 degrees fahrenheit, guaranteed to meet original manufacturer’s specifications. Interior Dimensions: 23"W x 24"D x 61 Overall Dimensions: 27"W x 35"D x 88"H Net Weight: 300 pounds |
| Espec Incubator, Model BNP-210 | |
| N2 O2 CO2 |
| Fisher Scientific Incubator, Model 413D | |
| Interior 20"D x 19"W x 30"H, 30-60 Degrees C Dual Chamber CO2Thermo |
| Fisher Scientific Incubator, Model 511 | |
| Thermo |
| Forma Scientific Incubator, Model 3957 | |
| Thermo |
| Forma Scientific Single Door, Water-Jacketed, Model 3187 | |
| Thermo |
| HotPack Incubator, Model 305713 | |
| HotPack Incubator, Model 351816 | |
| HotPack Incubator, Model 351820 | |
| HotPack Incubator, Model 351920 | |
| HotPack Incubator, Model 351922 | |
| Lab-Line Biotronette Matk III Environmental Chamber, Model 846 | |
| Lunaire, Water-Jacketed, Single Door, Model BIO665G, digital | |
| Nicholson Incubator, Air Stream, Model C300 | |
| Nikon Incubator, Microscope, Model NP-2 | |
| NP2 |
| Opti Quip Red Beam Incubator, Model 335 | |
| Powers Scientific Incubator, Model HIS33SDF | |
| Precision Incubator, Model 5122-1086 | |
| 51221086 |
| Robbins Hybridization Incubator, Model 310 | |
| Thermo Forma Incubator OEM Replacement Parts | |
| OEM Replacement parts for Forma Scientific Incubators. Models 3033, 3035, 3154, 3158, 3164, 3166, 3250, 3326, 3336, 3354, 3860, 3862 Examples: IR Sensor for 3033, 3035, 3860 and 3862 Digital Display for 3250, P/N- 320158 Digital Display Driver Circuit Board for 3250, P/N-190272 Microprocessor Control Circuit Board for 3250, P/N-190271 Thermal Conductivity Detectors (TC)for 3154, 3158, 3164, 3166, 3326, 3336, 3354 and others Temperature Control Board (37 C Fixed and Variable Temperature), CH/P CO2 Control Plug-In Module With Digital Display and CH/P Monitor & Alarm Plug-In Module With Digital Display for Models 3154, 3158, 3164, 3166, 3326, 3336 and 3354 CO2 Sensors Stainless Steel Shelves Blower Motors and Blower Wheels Fuses, Relays, Solenoid Valves, Triacs, etc. Decontamination Kit, P/N 190028 Forma Scientific |
| Thermo Forma Incubator OEM Replacement Parts for Model 3250 | |
| Vacuum Fluorescent Display, P/N- 320158 Display Driver Circuit Board, P/N- 190272 Microprocessor Control Circuit Board, P/N- 190271 CO2 Sensor Assembly, P/N- 290090 Control Panel Assembly, P/N- 140122 Blower Motor, P/N- 156080 Forma Scientific |
| Thermo Scientific Incubator, Model Heratherm IMH180-S |
|
| Thermolyne Incubator, Culture, Model 25E | |
| VWR Incubator, Model 21 | |
| Zeiss Air Stream Incubator, Model ASI400 | |
Accessories
| Forma Scientific CO2 / N2 Gas Guard, Model 3050 | |
| Forma Scientific CO2 Gas Guard, Model 3030 | |
| Thermo |
| Forma Scientific Decontamination Kit, Model 190028 | |
| Thermo Forma Decontamination Kit, Model 190651 | |
| Thermo Forma Hepa Filter Replacement Kit, Model 1900067 | |
| Thermo Forma Hepa Filter, Model 760175 | |
Anerobic Chamber
| Forma Scientific Anaerobic Incubator, Model 1024 | |
| Thermo |
| Forma Scientific Anaerobic System, Model 1025 | |
| Thermo |
Block Heater
| Clay Adams Dry Incubator, Model Marster |
|
| Fisher Scientific Dry Block, Model 11-715-109, 12mm | |
| Thermo |
| Kontes Block Heater, Model 0116 | |
| Lab-Line Multi-Blok Heater, Model 2050 | |
| Labline |
| Lab-Line Multi-Blok Heater, Model 2093 | |
| Labline |
| Lab-Line Multi-Blok Heater, Model 2097-1 | |
| Labline |
| Lab-Line Multi-Blok Heater, Model 2097-4 & 2054 dual temperature | |
| Labline |
| Lab-Line Multi-Blok Heater, Model 2097-6 | |
| Labline |
| Labconco Heating Block, Model 23012 | |
| Pierce Heating / Stirring Module, Model 18900 | |
| Reacti-Therm |
| Pierce Heating / Stirring Module, Model 344 | |
| Pierce Heating Module, Model 18800 | |
| Pierce Heating Module, Model 18835 | |
| Reacti-Therm 3 |
| Pierce Silli-Therm Heating Module, Model 19791 | |
| Pierce Silli-Therm Heating Module, Model 294 | |
| Scientific Products Dri Incubator, Model H2025-5 | |
| Scientific Products Heating Block, Model H2025-1 | |
| Tecam Dri-Block Heater, Model DB-3 | |
| DB3 |
| Techne Dry Block Heater, Model DB-3H | |
| Techne Dry Block Heater, Model DB-IM | |
| Thermolyne Dri-Bath, Model 17600 | |
| Thermolyne Dri-Bath, Model DB-16525, 16500 | |
| DB16525, |
| Thermolyne Dri-Bath, Model DB-28125 | |
| DB28125 |
| Thermolyne Heating Block, 12-Hole, Model BK165X7A | |
| Thermolyne Heating Block, Model BK165X12 | |
| Thermolyne Heating Block, Model BK165X12A | |
| Thermolyne Heating Block, Model BK165X17A | |
| VWR Analog 2 Block Heater, Model 12621-108 | |
| VWR Analog Block Heater, Model 12621-104 |
|
| VWR Digital Heatblock 2, Model 12621-088 | |
| VWR Digital Heatblock, Model 10027-036, Dual Block, New |
|
| With Calibration Certificate and RTD Probe Manufactures Description: VWR Digital Dry Block Heaters are ideal for incubation and activation of cultures, enzyme reactions, blood urea nitrogen determinations, immunoassays, melting/boiling points, and a wide variety of other laboratory procedures. -Exceptional temperature uniformity and accuracy -Hold interchangeable, modular heating blocks -Heat to 120̊C (248̊F) -Optional external temperature probe -LED display -Available with a NIST Traceable, ISO/IEC 17025 Accredited Calibration Certificate from Troemner The economical, versatile, and compact block heaters are designed for applications that require repeatable results and superior temperature stability. Accepts separate interchangeable modular blocks, which accommodate various sample enclosures such as vials, microplates, PCR strips, and a wide variety of tubes. Each block has a thermometer well, and features close tube-and-block contact for maximum heat retention. Easy-to-use front-mounted controls with independent LED displays show actual and set point temperatures. Microprocessor control offers a stability of 0.1̊C, while independent controls allow users to adjust temperature settings in ±0.1̊C increments. A timer will display elapsed time or when programmed to user-defined limit, will count down to zero and shut off unit. Audible alarm will sound when time reaches zero. All dry block heaters include a built-in support rod holder for mounting the probe kit. The optional external temperature probe enables the unit to read the actual or sample temperature and display that temperature on the control panel. The RTD probe is designed to fit perfectly into the thermometer well of each modular block. Kit includes a stainless steel RTD probe, 45.7 cm (18) stainless steel support rod, thermometer/temperature probe extension clamp, and hook connector. Caution: To avoid possible electrical hazard, do not fill well or block opening with water or other fluids. Unit is designed as a dry bath/incubator. Certifications: RoHS certified. 120V units are UL and C-UL listed. Calibrated Dry Block Heaters include a Troemner ISO/IEC Accredited Calibration Certificate traceable to NIST. The ISO/IEC 17025 Accredited Calibration Certificate includes multiple data points within the temperature range and time function with the associated uncertainties. Troemner is accredited by NVLAP under Laboratory Code 105013-0 to perform ISO/IEC 17025 calibrations. |
| VWR Digital Heatblock, Model 10027-210, Single Block, New |
|
| With Calibration Certificate and RTD Probe VWR Digital Dry Block Heaters are ideal for incubation and activation of cultures, enzyme reactions, blood urea nitrogen determinations, immunoassays, melting/boiling points, and a wide variety of other laboratory procedures. Manufactures Description: -Exceptional temperature uniformity and accuracy -Hold interchangeable, modular heating blocks -Heat to 120̊C (248̊F) -Optional external temperature probe -LED display -Available with a NIST Traceable, ISO/IEC 17025 Accredited Calibration Certificate from Troemner The economical, versatile, and compact block heaters are designed for applications that require repeatable results and superior temperature stability. Accepts separate interchangeable modular blocks, which accommodate various sample enclosures such as vials, microplates, PCR strips, and a wide variety of tubes. Each block has a thermometer well, and features close tube-and-block contact for maximum heat retention. Easy-to-use front-mounted controls with independent LED displays show actual and set point temperatures. Microprocessor control offers a stability of 0.1̊C, while independent controls allow users to adjust temperature settings in ±0.1̊C increments. A timer will display elapsed time or when programmed to user-defined limit, will count down to zero and shut off unit. Audible alarm will sound when time reaches zero. All dry block heaters include a built-in support rod holder for mounting the probe kit. The optional external temperature probe enables the unit to read the actual or sample temperature and display that temperature on the control panel. The RTD probe is designed to fit perfectly into the thermometer well of each modular block. Kit includes a stainless steel RTD probe, 45.7 cm (18) stainless steel support rod, thermometer/temperature probe extension clamp, and hook connector. Caution: To avoid possible electrical hazard, do not fill well or block opening with water or other fluids. Unit is designed as a dry bath/incubator. |
| VWR Digital Heatblock, Model 12621-084, Single Block |
|
| VWR Digital Dry Block Heaters are ideal for incubation and activation of cultures, enzyme reactions, blood urea nitrogen determinations, immunoassays, melting/boiling points, and a wide variety of other laboratory procedures. Manufactures Description: -Exceptional temperature uniformity and accuracy -Hold interchangeable, modular heating blocks -Heat to 120̊C (248̊F) -Optional external temperature probe -LED display The economical, versatile, and compact block heaters are designed for applications that require repeatable results and superior temperature stability. Accepts separate interchangeable modular blocks, which accommodate various sample enclosures such as vials, microplates, PCR strips, and a wide variety of tubes. Each block has a thermometer well, and features close tube-and-block contact for maximum heat retention. Easy-to-use front-mounted controls with independent LED displays show actual and set point temperatures. Microprocessor control offers a stability of 0.1̊C, while independent controls allow users to adjust temperature settings in ±0.1̊C increments. A timer will display elapsed time or when programmed to user-defined limit, will count down to zero and shut off unit. Audible alarm will sound when time reaches zero. All dry block heaters include a built-in support rod holder for mounting the probe kit. The optional external temperature probe enables the unit to read the actual or sample temperature and display that temperature on the control panel. The RTD probe is designed to fit perfectly into the thermometer well of each modular block. Kit includes a stainless steel RTD probe, 45.7 cm (18) stainless steel support rod, thermometer/temperature probe extension clamp, and hook connector. Caution: To avoid possible electrical hazard, do not fill well or block opening with water or other fluids. Unit is designed as a dry bath/incubator. |
| VWR Digital Single Block Heater, Model 12621-084 | |
| VWR Heating Block, Model 13259-000 |
|
| For use with VWR .5 mL Tapered Microcentrifuge Tubes For Tube Volume: 0.5 mL No. of Wells: 30 Well Depth: 27.6 mm Well Diameter: 7.9 mm L x W x H: 9.5 x 7.6 x 5.1 cm (3 3/4 x 3 x 2") Blue Anodized 000 |
| VWR Heating Block, Model 13259-002 |
|
| For use with 1.5 mL Eppendorf Microcentrifuge Tubes 20 Place x 1.5 mL Eppendorf Tube For Tube Volume: 1.5 mL No. of Wells: 20 Well Depth: 36.9 mm Well Diameter: 11.5 mm L x W x H: 9.5 x 7.6 x 5.1 cm (3 3/4 x 3 x 2") Blue Anodized 002 |
| VWR Heating Block, Model 13259-005 | |
| VWR Heating Block, Model 13259-107 |
|
| 24 Place x 10 mm Standard Test Tube Block For Tube Diameter: 10 mm No. of Wells: 24 Well Diameter: 10.7 mm L x W x H: 9.5 x 7.6 x 5.1 cm (3 3/4 x 3 x 2") Blue Anodized 107 |
| VWR Heating Block, Model 13259-130 |
|
| 12/13 mm Standard Test Tube Block For Tube Diameter: 12/13 mm No. of Wells: 20 Well Diameter: 13.9 mm L x W x H: 9.5 x 7.6 x 5.1 cm (3 3/4 x 3 x 2") Blue Anodized 130 |
| VWR Heating Block, Model 13259-162 |
|
| For 15/16 mm Tube Diameter For Tube Diameter: 15/16 mm No. of Wells: 12 L x W x H: 9.5 x 7.6 x 5.1 cm (3 3/4 x 3 x 2") Blue Anodized 162 |
| VWR Heating Block, Model 13259-242 | |
| Test Tube Combination: 6 mm, 12/13 mm and 25 mm tubes 242 |
| VWR Heating Block, Model 13259-250 |
|
| For use with 15 mL Conical-Bottom Centrifuge Tubes For Tube Volume: 15 mL No. of Wells: 12 Well Depth: 44.5 mm Well Diameter: 17.1 mm L x W x H: 9.5 x 7.6 x 5.1 cm (3 3/4 x 3 x 2") Blue Anodized 250 |
| VWR Heating Block, Model 13259-286 | |
| For 1.5 mL Microcentrifuge Tubes 286 |
| VWR Heating Block, Model 13259-290 |
|
| Designed for 12 Square cuvettes, these blocks feature two parallel slots which fit six cuvettes in each slot, arranged side by side for excellent stability and heat transfer. Slots accommodate 12.5mm (1/2") cuvettes. Single block size. L x W x H: 9.5 x 7.6 x 5.1 cm (3 3/4 x 3 x 2") Blue Anodized 290 |
| VWR Microplate Heating Block, Model 13259-295 |
|
| Heating block is ideal for use with 96-well or 384-well titer plates. It features a recessed well for better stability and a flat surface appropriate for flat or round-bottom plates. Double block size fits only 2, 4, or 6 block heaters. L x W x H: 15.1 x 9.5 x 5.7 cm (6 x 3 3/4 x 2 1/4") Blue Anodized 295 |
| VWR Select Digital Heatblock II, Model 13259-052 |
|
| VWR Select Digital Heatblock VI, Model 13259-058 | |
| VWR Standard Heat Block, Model 13259-036, Heatblock IV | |
Cell Rollers
| Bellco 5-Tier Cell Roller, Catalog No. | |
| Cell Production Roller Apparatus |
| Bellco Cell Roller, Model 7360-10115 | |
| Cell Production Roller Apparatus |
| Bellco Cell Roller, Model 7440-10115 | |
| Cell Production Roller Apparatus |
| Bellco Cell Roller, Model 7630-80509 | |
| Cell Production Roller Apparatus |
| Bellco Cell Roller, Model 7722-02020 | |
| Cell Production Roller Apparatus |
| Bellco Cell Roller, Model 7730-10005 | |
| Cell Production Roller Apparatus |
| Bellco Cell Roller, Model 7730-75500 | |
| Cell Production Roller Apparatus |
| Bellco Cell Roller, Model 7730-85000 | |
| Cell Production Roller Apparatus |
| Bellco Cell Rollers, 2-Tier to 9 Tier |
|
| Cell Production Roller Apparatus Sample Picture |
| Lab-Line Cel-Gro Roller Bottle, 2-tier, tabletop, Model 1507 |
|
| Labline |
| Wheaton Cell Roller III, Model 4862 | |
CO2 Cell Culture
| Bellco Incubator, Catalog 7727-20002 | |
| Interior 20"D x 19"W x 28"H, CO2 Water Jacketed, To 55 Degrees C |
| Forma Scientific CO2 Incubator, Model 3323 | |
| Thermo |
| Forma Scientific CO2 Incubator, Model 3546 |
|
| Thermo |
| Forma Scientific Environmental Chamber, Model 3851 |
|
| Thermo |
| Forma Scientific Incubator, Model 3029 | |
| Interior 27"W x 22"D x 29"H, To 60 Degrees C CO2 with CH/P Auto Controllers Thermo |
| Forma Scientific Incubator, Model 3110 | |
| Thermo |
| Forma Scientific Incubator, Model 3120 | |
| Thermo |
| Forma Scientific Incubator, Model 3130 |
|
| Thermo |
| Forma Scientific Incubator, Model 3154 | |
| Interior 19.75"W x 18.75"D x 26.75"H Single Door, Water-Jacketed Thermo |
| Forma Scientific Incubator, Model 3158 | |
| Interior 19.75"W x 18.75"D x 26.75"H, Single Door, Water-Jacketed Thermo |
| Forma Scientific Incubator, Model 3193 | |
| Automatic CO2 Forma Scientific |
| Forma Scientific Incubator, Model 3195 | |
| Thermo |
| Forma Scientific Incubator, Model 3315 | |
| Each chamber 19.75"W x 18.75"D x 26.75"H Single Door, Tri-Gas Water-jacketed Thermo |
| Forma Scientific Incubator, Model 3326 | |
| Each Chamber 19.8"W x 18.8"D x 26.8"H, Exterior 24.9"W x 23.9"D x 85.5"H, Double Door Water-Jacketed, Vertical Thermo |
| Forma Scientific Incubator, Model 3354 | |
| Each Chamber 19.75"W x 18.75"D x 26.75"H, Double Door Water-Jacketed, Vertical Thermo |
| Forma Scientific Reach-In Incubator, Model 3950, 29 Cubic Foot Capacity |
|
| Thermo Interior: 31"W x 27"D x 60"H Exterior: 38"W x 30"D x 80"H 29 cu ft 120 VAC, 60 Hz, 10A Temperature range: +5 degrees C above ambient to +60 degrees C. |
| Forma Scientific Reach-In Incubator, Model 3956 |
|
| Interior 31"W x 27"D x 60"H Available with Glass front door 29 cu ft ,CO2 Thermo same as Model 3950 |
| Forma Scientific Reach-In Incubator, Model 3956 |
|
| Interior 31"W x 27"D x 60"H Available with Optional Solid door with Lexan Inner door assembly29 cu ft ,CO2 Thermo same as Model 3950 |
| Forma Scientific Steri-Cult Incubator, Model 3033 | |
| Thermo |
| Heineke 7341 Vertical Double Door Water-Jacketed | |
| Heraeus CO2 Copper Lined Incubator, Type BB 6220 |
|
| Pictured are two individual units double stacked on one rolling cart. May be sold separately. |
| Heraeus CO2 Copper Lined Incubator, Type BB 6220 CU | |
| Heraeus Incubator, Model B5060EC-CO2 | |
| Hotpack Incubator, Multimode, Model 351921, Refrigerated/Heated CO2 | |
| Hotpack Incubator, single door, CO2, Model 351814 w/ chart recorder | |
| Lab-Line Incubator, Microprocessor CO2, Model 6201, 5.3 cubic feet | |
| Labline |
| Lab-Line Incubator, Microprocessor CO2, Model 6210 | |
| Labline |
| Napco CO2 Control, Model 3636-4 | |
| NAPCO Incubator, CO2 Water Jacketed, Model 5300, Double Door | |
| NAPCO Incubator, CO2 Water Jacketed, Model 6300, Double Door | |
| NAPCO Incubator, CO2 Water-Jacketed, Model 3321-14, Single Door | |
| NAPCO Incubator, CO2 Water-Jacketed, Model 4100, Single Door | |
| NAPCO Incubator, CO2 Water-Jacketed, Model 5200. Double Door | |
| NAPCO Incubator, CO2, Model 322 |
|
| New Brunswick Incubator, Model CO-21 | |
| NBS, CO21 |
| NuAire Incubator, Autoflow, Model NU-1700 | |
| Water-JacketedDouble Door Overall Dimensions:25"W x 75"H x 27"DNU1700 |
| NuAire Incubator, GP Autoflow, Model NU-1200 | |
| Water-JacketedDouble Door Overall Dimensions:25.5"W x 75.5"H x 27"DNU1200 |
| NuAire Incubator, IR Autoflow, Model NU-2700 | |
| CO2 Water-JacketedDouble Door Overall Dimensions:25.5"W x 75.5"H x 27"DNU2700 |
| NuAire Incubator, Model NU-4750 | |
| NuAire Incubator, TS Autoflow, Model NU-3700 | |
| CO2 Water-JacketedDouble Door Overall Dimensions:25"W x 75"H x 27"DTS: Timed Sequence Gas ControlNU3700 |
| Precision Incubator, Auto CO2, Water-Jacketed, Model 1020, Single Door | |
| Queue Incubator, CO2, Model 2410 | |
| Queue Incubator, Model 2210 | |
| Queue Incubator, Model 2220 | |
| Queue Incubator, Water-Jacketed, Model 2720, Cellstar |
|
| Queue Incubator, Water-Jacketed, Single-Door, Model 2200 | |
| Revco Incubator, CO2 Water-Jacketed, Model RCO3000SABA | |
| Revco Incubator, CO2 Water-Jacketed, Model RCO3000TAUA | |
| Revco Midi CO2 Incubator, Small 1.4 Cubic Feet, Model RM1300S-7-ABA | |
| CO2 |
| Sanyo CO2 Incubator, Model MCO-19AIC (UV) | |
| Thermo Electron Forma Scientific Reach-In Incubator, Model 3950 |
|
| Thermo Interior: 31"W x 27"D x 60"H Exterior: 38"W x 30"D x 80"H 29 cu ft 120 VAC, 60 Hz, 10A Temperature range: +5 degrees C above ambient to +60 degrees C. |
| Thermo Fisher CO2 Incubator, Model 3307 | |
| Forma Scientific |
| Thermo Forma CO2 Incubator, Model 3250 |
|
| Interior 19.25"W x 20"D x 25.625"H, Single Door, Water-Jacketed Forma Scientific |
| Thermo Forma Scientific CO2 / N2 Gas Guard, Model 3050 | |
| Thermo Forma Scientific Incubator, Model 3110 | |
| Thermo Forma Scientific Incubator, Model 370 |
|
| Thermo Forma Scientific Reach-In Incubator, Model 3950 |
|
| Thermo Interior: 31"W x 27"D x 60"H Exterior: 38"W x 30"D x 80"H 29 cu ft 120 VAC, 60 Hz, 10A Temperature range: +5 degrees C above ambient to +60 degrees C. |
| Thermo Forma Steri-Cult Incubator, Model 3307 | |
| Thermo Scientific Incubator, Model 3110 |
|
| Thermo Scientific Incubator, Model HERACELL 150i |
|
| Thermo Scientific Reach-In Incubator, Model 3950, 29 Cubic Foot Capacity |
|
| Interior: 31"W x 27"D x 60"H Exterior: 38"W x 30"D x 80"H 29 cu. ft. 120 VAC, 60 Hz, 10A Temperature range: +5 degrees C above ambient to +60 degrees C. |
| VWR / Shell Lab Gas Controller, Model 2003 | |
| VWR / Shell Lab Incubator, Model 1820 | |
| VWR Incubator, Model 1720 | |
| VWR Incubator, Model 1820IR | |
| VWR Incubator, Model 1830 | |
| VWR Incubator, Model 2300 | |
Forced-air
| Fisher Biotech Hybridization Incubator, Model FBH110 | |
| Forma Scientific Reach-In Incubator, Model 3927 | |
| Interior 36"W x 25.63"D x 59.50"H, 32 cu. ft. Refrigerated Thermo |
| Forma Scientific Reach-In Incubator, Model 3937 | |
| Interior 36"W x 25.63"D x 59.50"H Glass front door,32 cu ft Thermo same as Model 3960 |
| Helmer Platelet Incubator, Model PC4200 | |
| Lab-Line Hybridization Incubator, Model 309 |
|
| Labline |
| Lab-Line Incubator, Model 100 | |
| Precision / Thelco Large Capacity Incubator, Model 32M, 30M |
|
| 32 Cubic Feet 30 Square Feet of shelf surface area |
| Precision Incubator, Mechanical Convection, Model 30M | |
| Interior 20"D x 30"W x 72"H to 70 Degrees C Large Volume, 30 Cubic Feet |
| Precision Incubator, Mechanical Convection, Model 6LM, 10.1 cu ft, digital | |
| Precision Incubator, Mechanical Convection, Model 6M, 10 cubic ft | |
| Sage Incubator, Air Curtain, Model 279 | |
| VWR Incubator, Model 1520 | |
| VWR Incubator, Model 1535 | |
| VWR Incubator, Model 1540 | |
| VWR Incubator, Model 3015 | |
Gravity
| Blue M Incubator, Model 100A | |
| Interior 12"W x 12"D x 12"H, To 65 Degrees C |
| Boekel Incubator, Model 132000 | |
| CMS Incubator, Model 120-931 | |
| Single Door, Dual Temperature Controls |
| CSE Incubator, Model 100 | |
| CSE Incubator, Model 120 | |
| Fisher Isotemp Incubator, Model 6845, Catalog Number 11690650D, Gravity Convection |
|
| Manufacturers Specifications: -Temperature Range: 30̊C to 75̊C -Temperature Uniformity: ±0.7̊C -Temperature Resolution: 0.1̊C -Volume: 5 cubic feet -Microprocessor control -Controls are conveniently located at the top of the incubator chamber -Keypad with arrow keys to increase or decrease set point temperature in 0.1̊C increments -Overtemperature value is automatically set at 3̊C above setpoint -Circuit breaker protects incubator from power surges; battery backup -Designed to stack two units Interior Dimensions: 18"W x 17"D x 26 ½" H Overall Dimensions: 25"W x 25"D x 39 3/4"H Net Weight: 145 pounds |
| Fisher Scientific Incubator, Gravity Convection, Model 230D | |
| Interior 16"D x 19"W x 18"H, 30 to 60 Degrees C 3.1 cu.ftThermo |
| Lab-Line Incubator, Imperial III, Model 302 | |
| Lab-Line Incubator, Imperial III, Model 305 | |
| Labline |
| Lab-Line Incubator, Model 306 | |
| Precision Digital Laboratory Incubator, Model 5DG | |
| Precision Incubator, Gravity , Model 31483 | |
| Precision Incubator, Model 2DG, Catalog No. 51221112 |
|
| Precision Incubator, Model 2EG | |
| Precision Incubator, Model 4 | |
| Precision Incubator, Model 4L, Catalog No. 31532 |
|
| VWR Digital Double Stacked Gravity Convection Air Jacketed General Purpose Incubator, Model 1565 |
|
| Capacity: 5.8 Cubic Feet per chamber There are four shelves per chamber. The upper chamber has four Stainless Steel shelves and the bottom chamber has four coated steel shelves. The Air Jacketed feature has a fan motor that circulates the air around the heating elements between the inner Stainless Steel chamber and the exterior walls of the incubator which allows for even heat distribution around the outside of the inner chamber. Interior Dimensions: 19.25"W x 20"D x 26"H per chamber Overall Dimensions: 25"W x 27"D x 74"H Net Weight: 316 pounds |
| VWR Mini Incubator, Model 97025-630 | |
| VWR Personal-Sized Incubator, Model 97025-630 | |
| Exterior Dimensions: 28.5W x 28D x 33.5H cm (11 1/4 x 11 x 13 3/16") Interior Dimensions: 23W x 20D x 20H cm (9 x 7 7/8 x 7 7/8") Temperature Range: 5° above ambient to 60°C (140°F) |
Refrigerated
| Baxter Cryo-Fridge, Double Door Refrigerator, Model LR504AUB |
|
| Equatherm Incubator, Model 273-794 | |
| Fisher Scientific Low Temperature Incubator, Model 307 |
|
| 19.9 cu. ft. capacity, -10 to +50 Degrees C Thermo |
| Forma Scientific Reach-In Incubator, Model 3918 | |
| Thermo |
| Forma Scientific Reach-In Incubator, Model 3919 | |
| Interior 35.5"W x 24.25"D x 59.5"H, -10 to +70 Degrees C,Refrigerated, 32 cu ft with chart recorder Thermo |
| Forma Scientific Reach-In Incubator, Model 3920, refrigerated, 29 cu ft with chart recorder |
|
| Thermo |
| Forma Scientific Reach-In Refrigerated Incubator, Model 3940 | |
| Interior 31"W x 27"D x 60"H, Refrigerated, Digital Temperature and Humidity Controls. Stability Chamber Thermo |
| Forma Scientific Reach-In Refrigerated Incubator, Model 3940M | |
| Interior 31"W x 27"D x 60"H, Refrigerated, Digital Temperature and Humidity Controls. Stability Chamber Thermo |
| Jewett Refrigerator, Model BBR25 |
|
| Blood Bank Refrigerator Single Glass Door |
| Lab-Line Biotronette Plant Growth Chamber, Catalog 844 | |
| Labline |
| Lab-Line Refrigerator, Explosion-Proof, Model 3559 | |
| Labline |
| LUNAIRE ENVIRONMENTAL Chamber, Model CEO932W-4 | |
| Steady State & Stability test Chamber heating / Cooling / Humidity |
| Panasonic Cooled Incubator, Model MIR-254-PA |
|
| Refrigerated Incubator |
| Percival Low Temperature Incubator, Model I-35LL | |
| Precision Refrigerated Growth Chamber, Model 808, floor model | |
| Revco Refrigerator, Model REL5004ABA | |
| Shell Refrigerated Incubator, small | |
| Thermo Forma Scientific Environmental Chamber, Model 3920, refrigerated, 29 cu ft | |
| Reach-In Incubator |
| Victory Stainless Steel Refrigerator, Model RS-ID-55 | |
| VWR Incubator, Model 2020 | |
| VWR Sheldon Low Temp. Incubator, Model 2020 Has three shelves. Missing lower two as it had a shaker sitting on the bottom. Also missing decorative strip that covers thermostat.. Electrical Specifications: 115VAC, 50/60Hz, 8.0A. Capacity: 20 cu. ft. (305 B.O.D. bottles). Temperature Range: -10°C to +40°C Internal Dimensions: 27W x 23D x 55.5H inches. External Dimensions: 34W x 30D x 77H inches. Net Weight: 246 lbs. |
| VWR Refrigerator, Flammable Storage, Model R421FA14 | |
Roll-In
| Bellco Incubator, Cat 7728-02005 | |
| Interior 29.5"W x 14"D x 20"H, To 50 Degrees C Benchtop for roller bottle apparatus |
| Bellco Mini Roll-In Incubator | |
| Interior 35"W x 26"D x 40"H, To 50 Degrees C |
| Bellco Roll-In Incubator CO2, Model BG-927 | |
| Catalog No. BG 927 |
| Bellco Roll-In Incubator, Model 7728-50023 | |
| Catalog No. 7728 50023 |
| Bellco Roll-In Incubator, Model 7728-59005 | |
| Interior 35"W x 26"D x 76"H, To 50 Degrees C, With Double Window DoorCatalog No.7728-59005 |
Shaking Incubators
| Awareness Technologies Microplate Incubator + Shaker, Model Stat Fax 2200 | |
| Barnstead Refrigerated Shaker Incubator, Model MAXQ6000, SHKE6000-7 | |
| Barnstead/Lab-Line A-Class Max Q4000 Shaking Incubator, Model SHKE4000-7 | |
| Incubator Shaker |
| Boekel Incubator Shaker II, Model 136400 | |
| Boekel Incubator Shaker, Model 136500 | |
| Infors Shaking Incubator, Model RC-TK , large floor mdl w/platform | |
| Infors Shaking Incubator, Model RS-T | |
| Lab-Line Bench Top Incubated Shaker, Model 3527 |
|
| Labline |
| Lab-Line Bench Top Incubated Shaker, Model 3527CC | |
| With Cooling CoilLabline |
| Lab-Line Bench Top Incubated Shaker, Model 3528 | |
| Labline |
| Lab-Line Gyrotory Shaking Incubator, Model 3526, King Size with platform |
|
| Floor Model Labline |
| Lab-Line Incubator Shaker, Model 4628CC | |
| Labnet Shaking Incubator, Model 211DS | |
| New Brunswick Platforms, Assorted, 18" x 30" | |
| New Brunswick Scientific Incubator Shaker, Model Classic C-25 | |
| Includes Platform NBS, C25 Classic Series |
| New Brunswick Scientific Incubator Shaker, Model Excella E24 |
|
| Includes Platform Assorted Flask clamps sold separately. NBS |
| New Brunswick Scientific Incubator Shaker, Model G-24, Tabletop (Analog) | |
| Includes Platform NBS, G24 |
| New Brunswick Scientific Incubator Shaker, Model G-24D, Tabletop (digital) |
|
| Includes Platform NBS, G24D |
| New Brunswick Scientific Incubator Shaker, Model G-25, King Size |
|
| Includes Platform NBS, G25 |
| New Brunswick Scientific Incubator Shaker, Model I Series 24 | |
| Includes Platform NBS |
| New Brunswick Scientific Incubator Shaker, Model Innova 40 | |
| Includes Platform NBS |
| New Brunswick Scientific Incubator Shaker, Model Innova 4000 |
|
| Includes Platform NBS |
| New Brunswick Scientific Incubator Shaker, Model Innova 4080 | |
| Includes Platform NBS |
| New Brunswick Scientific Incubator Shaker, Model Innova 4200 |
|
| New Brunswick Scientific’s Innova 4200 Incubator Biological Shaker is a very versatile shaker for the biological research laboratory. The Innova 4200 provides a temperature-controlled environment that can be equipped with various accessories to adapt it for the culture of microorganisms, cell culture and hybridization. Automatic features include an interlock door that shuts off the shaker when the door is open, chamber temperature shutoff, and overload/unbalanced sensor that automatically limits the speed of the shaker when an unbalanced or overloaded condition is detected. Audible and visual alarms alert the user when the temperature or speed is out of range. Microprocessor controller with feedback controls the temperature and speed of the shaker. Temperature and speed setpoints are entered and changed using the membrane switch keypad. Setpoints and the actual values are displayed on the 3/8” (9.5 mm) bright LED display. The shaker operates continuously, or in a timed mode via a programmable timer for shaking periods of 0.1 hr–99.9 hrs. An audible and visual alarm indicates the end of a timed cycle. The triple eccentric drive is counterbalanced and provides horizontal plane rotary motion in ¾? circular motion. The Innova 4200 has a (0–5 Volt) analog chart recorder outputs for speed or temperature. The 4200 is stackable (up to two units), and accommodates routine laboratory accessories like Rollers, Magnetic Stirrers, Rockers, and Shakers. A wide variety of platforms and accessories are available for the Innova 4200. The New Brunswick INNOVA 4200 Series are benchtop gyratory incubator shakers. Designed for versatility, these shakers are multipurpose instruments that accept flasks up to 6 liters, and has one stationary shelf for added incubating or storing capability. Fitted with a front-opening door, the INNOVA 4200 shakers can be used on or under the bench, or floor-stacked for space savings. The unit also offers a wide temperature range of 5̊C above ambient to 80̊C The large viewing window and internal light feature of the INNOVA 4200 series provides clear chamber visibility, minimizing the need to open the door. When needed, its rapid air circulation also produces quick temperature recovery. Moreover, an in-chamber, moisture-proof receptacle secures power for accessories including rockers, rollers, or secondary shakers. Includes Platform NBS |
| New Brunswick Scientific Incubator Shaker, Model Innova 4300 |
|
| Includes Platform NBS I-2500 |
| New Brunswick Scientific Incubator Shaker, Model Innova 4335 | |
| Includes Platform, Refrigerated NBS |
| New Brunswick Scientific Incubator Shaker, Model Innova 4400 | |
| Includes Platform Stackable NBS |
| New Brunswick Scientific Psycrotherm Incubator Shaker, Model G-26 |
|
| Includes Platform, Refrigerated NBS, G26 |
| New Brunswick Scientific Psycrotherm Incubator Shaker, Model G-27 with lights | |
| Includes Platform NBS, G27 |
| New Brunswick Scientific Psycrotherm Incubator Shaker, Model R-26 | |
| Includes Platform, Reciprocating, Refrigerated NBS, R26 |
| New Brunswick Scientific Refrigerated Incubator Shaker, Model Excella E25R | |
| New Brunswick Scientific Refrigerated Incubator Shaker, Model Innova 4230 | |
| Stackable NBS |
| Queue, Shaking Incubator, Tabletop, Model 4730 w/universal platform | |
| Thermo Scientific MaxQ 4450 Mini Incubator Shaker - Digital, Model 4333 |
|
| Manufacturers Description: Clear, scratch-resistant lid allows unobstructed sample viewing without disturbing chamber temperature. Chamber holds four 1L flasks. Temperature range: (5̊C above ambient to 80̊C). Monitor and control chamber temperature range with ±0.1̊C accuracy at 37̊C. Triple eccentric drive handles heavy loads, uniform agitation and continuous 24-hour operation, even at high speeds. Overtemperature safety feature with independent thermostat provides additional backup by controlling heat if main temperature controller fails. Interlock stops platform when lid is opened. Three individual LED displays: speed, time and temperature. Variable speed control from 15 to 500rpm. Continuous and timed operation from 0.1 hour up to 999 hours or 0.1 to 999 min. Shaker shutdown and audible/visual alarms signal temperature deviations or if unit operates ±10% of set speed, preventing shaker from walking. Soft-start feature eliminates sudden starts and stops, splashing of vessel contents or wetting of flask closure. Set point retention retains parameters during power failure and restarts unit automatically after power is restored. Solid-state DC brushless motor is maintenance-free. Applications: Cell culture, Solubility studies, Extraction procedures, General mixing, Bacterial suspensions, Staining and destaining, Washing procedures, Hybridization and Protein expression in bacteria. Includes 13 x 11 in. universal platform equipped with six microplate carriers. |